15V - 25V Ac

 

Ac - Ac POWER INPUT

40V - 220V 

SENSING INPUT

OUTPUT AMPERES

80% OF POWER INPUT

3A CONTINUOUS

OUTPUT VOLTAGE

The SE-1D02 is a fullwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a budget friendly portable generator.

The SE-1L03 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator.

SENSING INPUT

180V - 270V Ac

OUTPUT AMPERES

 0 - 80V DC

3A CONTINUOUS

OUTPUT VOLTAGE

INPUT REQUIREMENTS

1 PHASE + NEUTRAL

 

The SE-1LH06 is a fullwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator.

INPUT REQUIREMENTS

1 PHASE + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 180V DC

6A CONTINUOUS

OUTPUT VOLTAGE

180V - 270V Ac

 

The SE-1L30 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush generator.

INPUT REQUIREMENTS

1 PHASE + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 80V DC

30A CONTINUOUS

OUTPUT VOLTAGE

180V - 270V Ac

 

The SE-1C03 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush generator.

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 80V DC

3A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-1L08 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 90V DC

10A CONTINUOUS

OUTPUT VOLTAGE

180V - 270V Ac

 

The SE-1L08 H.V. is a fullwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 150V DC

5A CONTINUOUS

OUTPUT VOLTAGE

180V - 270V Ac

 

The SE-1C08 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator.

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

  0 - 90V DC

10A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-1C08 H.V. is a fullwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brushless generator.

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 150V DC

5A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-2C08 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush or brushless generator.

INPUT REQUIREMENTS

3 PHASES 

SENSING INPUT

OUTPUT AMPERES

 0 - 130V DC

5A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-2C12 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush or brushless generator.

INPUT REQUIREMENTS

3 PHASES 

SENSING INPUT

OUTPUT AMPERES

 0 - 130V DC

6A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-1C40 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush generator.

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 90V DC

50A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-1C60 is a halfwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush generator.

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 170V DC

30A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-1C80 is a fullwave phase controlled thyristor type Automatic Voltage Regulator and forms part of the excitation system for a brush generator.

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 170V DC

60A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-4LH15 is a high performance three angle fullwave phase AVR designed to performs especially good for turbogenerators and shaft generators.

It powered from a 1.5kva special  transformer that completely isolates the AVR at the same time.

It also features (+/-) 5v VAR/PF control if needed.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 120V DC

15A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-4E15 is a high performance three angle fullwave phase AVR designed to performs especially good for high current
brushless generators. It powered from a 1.5kva special  transformer that completely isolates the AVR at the same time.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 120V DC

20A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V Ac

 

The SE-2GM09 is a fullwave phase controled thyristor type AVR.

The excitation power is delivered from a three-phase permanent magnet generator (PMG). Our AVRs works normally

with ANY PMG frequency ( 30Hz - 300Hz ). 

It also features (+/-) 5v VAR/PF control if needed.

INPUT REQUIREMENTS

2 PHASES

SENSING INPUT

OUTPUT AMPERES

80% OF PMG VOLTAGE

10A CONTINUOUS

OUTPUT VOLTAGE

190V - 500V

 

The SE-5GM15 is a fullwave phase controled thyristor type AVR.

The excitation power is delivered from a three-phase permanent magnet generator (PMG). Our AVRs works normally

with ANY PMG frequency ( 30Hz - 300Hz ). 

It also features (+/-) 5v VAR/PF control if needed.

INPUT REQUIREMENTS

2 PHASES

SENSING INPUT

OUTPUT AMPERES

80% OF PMG VOLTAGE

10A CONTINUOUS

OUTPUT VOLTAGE

190V - 500V

 

The SE-4E65 is a high performance three angle fullwave phase AVR designed to performs especially good for high current brush generators.

It powered from a custom made - per application - special  transformer that completely isolates the AVR at the same time.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 150V DC

70A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V

 

The SE-4E110 is a high performance three angle fullwave phase AVR designed to performs especially good for high current brush generators.

It powered from a custom made - per application - special  transformer that completely isolates the AVR at the same time.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 150V DC

120A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V

 

The SE-4E150 is a high performance three angle fullwave phase AVR designed to performs especially good for high current brush generators.

It powered from a custom made - per application - special  transformer that completely isolates the AVR at the same time.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 180V DC

150A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V

 

The SE-3E110 is a very fast response high performance three angle fullwave phase AVR designed to performs especially good for high current brush generators. 

The SE-3E110 doesn't need a power transformer to operate. 

INPUT REQUIREMENTS

3 PHASES + NEUTRAL

SENSING INPUT

OUTPUT AMPERES

 0 - 150V DC

120A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V

 

The SE-4E200 is a high performance three angle fullwave phase AVR designed to performs especially good for high current brush generators.

It powered from a custom made - per application - special  transformer that completely isolates the AVR at the same time.

INPUT REQUIREMENTS

3 PHASES

SENSING INPUT

OUTPUT AMPERES

 0 - 200V DC

200A CONTINUOUS

OUTPUT VOLTAGE

350V - 500V

For the best viewing experience please use Google Chrome

© 2019 by POWER ELECTRONICS